H&R Trak+ DR wheel spacers push each 5x130 wheel outward 5mm per side for a flush fender fit, staying hubcentric on the 71.6mm bore. Machined from a proprietary alloy with higher tensile strength than 6061-T6 billet aluminum, the full-contact hub spreads load evenly like the factory hub. Bolt-through DR design reuses your existing lug bolts; sold as a pair.
| Type | Hubcentric wheel spacer (H&R Trak+ DR), bolt-through |
| Thickness | 5mm |
| Bolt Pattern | 5x130 |
| Center Bore | 71.6mm |
| Material | Proprietary alloy (stronger than 6061-T6 billet aluminum) |
| Finish | Black |
| Thread | 14x1.5 |
| Hardware | Bolt-through (DR) — reuses factory lug bolts |
| Quantity | Pair |
Documents: Installation Instructions (PDF)
This part fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Porsche | 718 Boxster | Base |
| 2018-2019 | Porsche | 718 Boxster | GTS |
| 2017-2020 | Porsche | 718 Boxster | S |
| 2017-2020 | Porsche | 718 Cayman | Base |
| 2020 | Porsche | 718 Cayman | GT4 |
| 2018-2019 | Porsche | 718 Cayman | GTS |
| 2017-2020 | Porsche | 718 Cayman | S |
| 2012-2020 | Porsche | 911 | Carrera |
| 2013-2019 | Porsche | 911 | Carrera 4 |
| 2013-2020 | Porsche | 911 | Carrera 4S |
| 2015-2016,2018-2019 | Porsche | 911 | Carrera GTS |
| 2012-2020 | Porsche | 911 | Carrera S |
| 2014-2019 | Porsche | 911 | Targa 4 |
| 2014-2019 | Porsche | 911 | Targa 4S |
| 2014-2019 | Porsche | 911 | Turbo |
| 2014-2019 | Porsche | 911 | Turbo S |
| 2012-2016 | Porsche | Boxster | Base |
| 2012-2016 | Porsche | Boxster | S |
| 2012 | Porsche | Boxster | S Black Edition |
| 2011-2020 | Porsche | Panamera | 4 |
| 2010-2020 | Porsche | Panamera | 4S |
| 2014-2016 | Porsche | Panamera | 4S Executive |
| 2011-2016 | Porsche | Panamera | Base |
| 2010-2016 | Porsche | Panamera | S |
| 2010-2020 | Porsche | Panamera | Turbo |
| 2014-2020 | Porsche | Panamera | Turbo Executive |
| 2012-2016 | Porsche | Panamera | Turbo S |
| 2014-2016 | Porsche | Panamera | Turbo S Executive |
