A set of eight Pro-H connecting rods for the BMW S63 and N63 4.4L twin turbo V8, cut from Carrilloy steel forgings, heat treated and shot peened. Each rod measures 5.453 in (138.5 mm) center to center with a 22 mm pin bore and a 57.6 mm big end bore, and weighs 538 g. The rods use 3/8 in WMC bolts in H11 tool steel, good for about 15 to 18 torque cycles, and come with CP-Carrillo bolt lube.
Specifications
| Type |
Connecting Rod Set |
| Series / Beam |
Pro-H (H-beam) |
| Engine Application |
BMW S63B44T0 (S63TU), S63B44T2, S63B44T4 and N63B44T0 (N63TU) 4.4L twin turbo V8; BMW M5, M6, X5 M, X6 M |
| Material |
Carrilloy chrome, nickel, moly, vanadium steel |
| Center-to-Center |
5.453 in (138.5 mm) |
| Big End Bore |
2.268 in (57.6 mm) |
| Big End Width |
0.705 in (17.91 mm) |
| Pin Bore |
22 mm |
| Pin Width |
0.823 in (20.9 mm) |
| Weight |
538 g per rod (366 g rotating, 172 g reciprocating) |
| Bolt |
3/8-24 WMC, H11 tool steel, about 15 to 18 torque cycles |
| Set Count |
8 |
| Fitment Notes |
Check the engine code against the Engine Application row before ordering |
| Install |
Stretch method preferred; torque and angle values on the Steel Bolt instruction sheet apply only with the CP-Carrillo lube supplied, otherwise install by stretch only |
| Part Number |
SCR11938-8 |
Documents: Steel Bolt Instructions (PDF)