The Bullet Series BLS1127-015 is a forged 2618 aluminum piston set for the Chevrolet LS3, machined to a 4.080 inch bore for a block taken 0.015 inch over the 4.065 inch standard. The flat top crown carries two valve reliefs cut 0.200 inch deep for 3.5cc of relief volume and returns 10.1:1 compression against a 70cc chamber, with a 1.295 inch compression height matched to the factory 3.622 inch stroke and a 6.125 inch rod. Every 475 gram piston is balanced to within one gram and uses contact reduction grooves, an accumulator groove and dual forced pin oilers. The set includes a 1.5mm, 1.5mm and 3.0mm ring pack, 0.927 inch chromoly wrist pins and wire locks.
Specifications
| Type |
Forged piston set (Bullet Series) |
| Application |
Chevrolet LS3 |
| Material |
2618 forged aluminum |
| Bore |
4.080 in |
| Size |
+0.015 in over standard (4.065 in) |
| Stroke |
3.622 in |
| Rod Length |
6.125 in |
| Compression Height |
1.295 in |
| Piston Top |
Flat top, two valve reliefs 0.200 in deep (-3.5cc) |
| Compression Ratio |
10.1:1 (70cc chamber) |
| Wrist Pin |
0.927 in x 2.250 in |
| Ring Pack |
1.5mm x 1.5mm x 3.0mm |
| Piston Weight |
475 g |
| Included |
Pistons, rings, chromoly wrist pins, wire locks |
| Quantity |
Set of 8 |
| Part Number |
BLS1127-015 |