Foaming Surface Wash is a dual-layer snow foam formulated from the ground up for THE BOSS Foam Cannon Auto-Mix system. The two layers do different jobs: the primary foam clings to the surface and softens road film and organic contaminants, while the secondary foam releases those contaminants and carries the abrasive grit safely to the ground. That is what makes a foam wash worth doing, the grit is off the paint before a mitt ever touches it, which is how wash-induced scratches are avoided. Griot's rates dwell time at 5 to 10 minutes of active cleaning.
The formula is pH-neutral, so it retains existing waxes and sealants and can be used for routine maintenance washing. Part number B3201 is the one-gallon jug; the same concentrate is offered as 35 oz bottle B3203, which threads directly onto the cannon. Note that this is Foaming Surface Wash and not Foaming Surface Prep, the two are different products with different dilutions, and it is a foam cannon concentrate, distinct from Car Wash (11103), the bucket soap, and Spray-On Car Wash (10984), the ready-to-use waterless spray.
Specifications
| Type |
Foam cannon car wash concentrate |
| Volume |
1 gallon (128 fl oz) |
| Form |
Liquid concentrate for foam cannon |
| Dilution Ratio |
Manual-Mix 20:1 (1.6 oz per jar, topped with water); Auto-Mix draws straight concentrate, metered by the cannon |
| Key Technology |
Dual-layer pH-neutral snow foam blended for THE BOSS Foam Cannon Auto-Mix |
| Dwell Time |
5 to 10 minutes; do not allow to dry on the surface |
| Safe On |
Vehicle paint and exterior surfaces; retains existing waxes and sealants |
| Quantity |
4 pack |
| Part Number |
B3201 (SKU: GRGB3201) |
Documents: BOSS Foaming System Routine Maintenance Method Guide (PDF)