H&R Trak+ DR wheel spacers push each 5x112 wheel outward 10mm per side for a flush fender fit, staying hubcentric on the 57.1mm bore. Machined from a proprietary alloy with higher tensile strength than 6061-T6 billet aluminum, the full-contact hub spreads load evenly like the factory hub. DR spacers sit between the hub and the wheel, so longer wheel bolts or studs are required and sold separately; sold as a pair.
Note: Product images may be representative samples and may not show the exact thickness, bolt pattern, or finish. Please refer to the specifications below for the exact details of this item.
Specifications
| Type | Hubcentric wheel spacer (H&R Trak+ DR), bolt-through |
| Series | TRAK+ Wheel Spacer |
| Thickness | 10mm |
| Bolt Pattern | 5x112 |
| Center Bore | 57.1mm |
| Material | Proprietary alloy (stronger than 6061-T6 billet aluminum) |
| Finish | Black |
| Thread | 14x1.5 |
| Hardware | Longer wheel bolts required, sold separately |
| Spacer Type | DR |
| Spacer Width | 10mm |
| Quantity | Pair |
| Fitment Notes | Black; All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines: a) If possible, name the brand of wheel. b) New bolts must be longer than the original bolts by the width of the wheel spacer used. c) The bolt head must be identical to the existing bolt: Taper 60° End digit 01 Round head for M12/d24 mm, for M14/d28 mm End digit 02 Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03 Flat head for Porsche original wheels M14 x 1.5 End digit 06 d) Safety guidelines (Minimum number of turns for wheel bolts / nuts): M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).; Careful attention must be paid to the vehicle hub height and inner wheel bevel measurements. Failure to follow the measurement guidelines below can result in serious damage to wheel spacers, wheels, and mounting hardware. Part Num. System Widening Per Side Maximum Hub Height Inner Wheel Bevel 1465605 DR / 7 8.00mm 4.0 x 45 degrees 162345712 DR / 8 14.00mm 7.0 x 45 degrees 162555716 DR / 8 14.00mm 7.0 x 45 degrees 1655572 DR / 8 14.00mm 7.0 x 45 degrees 1655573 DR / 8 12.00mm 6.0 x 45 degrees 1655577 DR / 8 12.00mm 6.0 x 45 degrees 1655668 DR / 8 13.50mm 6.5 x 45 degrees 1665673MZ5 DRS-MZ / 8 9.00mm 3.0 x 45 degrees 202345714 DR / 10 16.00mm 7.0 x 45 degrees 20245410 DRS / 10 11.00mm 2.0 x 45 degrees 202454101 DRS / 10 11.00mm 2.0 x 45 degrees 20245414 DRS / 10 11.00mm 2.0 x 45 degrees 20245616 DRS / 10 10.00mm 2.0 x 45 degrees 2025541 DRS / 10 10.00mm 2.0 x 45 degrees 20255571 DR / 10 16.00mm 7.0 x 45 degrees 202555712A DR / 10 16.00mm 7.0 x 45 degrees 202555712B DR / 10 14.00mm 5.0 x 45 degrees 20346331 DRS / 10 11.00mm 2.0 x 45 degrees 20356330 DR / 10 11.00mm 2.0 x 45 degrees 20356331 DRS / 10 11.00mm 2.0 x 45 degrees 2035650 DR / 10 11.00mm 2.0 x 45 degrees 20365601 DR / 10 11.00mm 2.0 x 45 degrees 2055571A DR / 10 15.50mm 6.5 x 45 degrees 2055571B DR / 10 12.00mm 4.0 x 45 degrees 2055573A DR / 10 15.00mm 6.0 x 45 degrees 2055573B DR / 10 12.00mm 4.0 x 45 degrees 2055577A DR / 10 15.00mm 6.0 x 45 degrees 2055577B DR / 10 12.00mm 4.0 x 45 degrees 2055665 DR / 10 9.00mm 90 degrees 20556650 DR / 10 10.00mm 90 degrees 2055668 DR / 10 13.50mm 5.0 x 45 degrees 2064640 DRS / 10 11.00mm 2.0 x 45 degrees 2064662 DRS / 10 10.00mm 2.0 x 45 degrees 20656014 DRS / 10 11.00mm 2.0 x 45 degrees 2065640 DRS / 10 11.00mm 2.0 x 45 degrees 2065642MZ5 DRS-MZ / 10 9.00mm 2.0 x 45 degrees tr> 2065643MZ5 DRS-MZ / 10 9.00mm 2.0 x 45 degrees 2065662 DRS / 10 10.00mm 2.0 x 45 degrees 2065700 DRS / 10 11.00mm 2.0 x 45 degrees 2075664 DR / 10 11.00mm 90 degrees 2075725 DR / 10 12.00mm 4.0 x 45 degrees 2075726 DR / 10 12.00mm 4.0 x 45 degrees 2075740 DR / 10 11.00mm 2.0 x 45 degrees 2255664 DR / 11 11.00mm 90 degrees 22556659 DR / 11 9.00mm 90 degrees 2265681CR DR / 11 20.00mm N/A 24255571 DR / 12 15.00mm 5.0 x 45 degrees 2435650 DR / 12 10.00mm 2.0 x 45 degrees 2455571 DR / 12 15.00mm 5.0 x 45 degrees 2455577 DR / 12 15.00mm 5.0 x 45 degrees 2455664 DR / 12 11.50mm 90 degrees 2455665 DR / 12 10.00mm 90 degrees 24556650 DR / 12 11.00mm 90 degrees 2455668 DR / 12 13.50mm 4.0 x 45 degrees 2475664 DR / 12 11.50mm 90 degrees 2475725 DR / 12 12.00mm 2.0 x 45 degrees 2475726 DR / 12 12.00mm 2.0 x 45 degrees 2475740 DR / 12 12.00mm 2.0 x 45 degrees 2655664 DR / 13 12.00mm 90 degrees 2655665 DR / 13 12.50mm 90 degrees 2655669 DR / 13 14.00mm 2.0 x 45 degrees 26556650 DR / 13 11.50mm 90 degrees 2675726 DR / 13 14.50mm 2.0 x 45 degrees 2865642MZ5 DRS-MZ / 14 14.00mm 2.0 x 45 degrees 3055668 DR / 15 17.00mm 4.0 x 45 degrees 4065642 DRM / 20 9.00mm 2.0 x 45 degrees |
| Part Number | 2055577ASW |
Documents: Installation Instructions (PDF)
This part fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2026 | Audi | Q3 | Base |
| 2022-2025 | Audi | Q4 e-tron | |
| 2022-2026 | Audi | Q4 e-tron | Premium |
| 2022-2026 | Audi | Q4 e-tron | Premium Plus |
| 2022-2025 | Audi | Q4 e-tron | Prestige |
| 2022-2025 | Audi | Q4 e-tron Sportback | |
| 2022-2026 | Audi | Q4 e-tron Sportback | Premium |
| 2022-2026 | Audi | Q4 e-tron Sportback | Premium Plus |
| 2022-2025 | Audi | Q4 e-tron Sportback | Prestige |
| 2019-2020 | Volkswagen | Arteon | SE |
| 2019 | Volkswagen | Arteon | SE R-Line |
| 2019-2020 | Volkswagen | Arteon | SEL |
| 2019 | Volkswagen | Arteon | SEL Premium |
| 2019 | Volkswagen | Arteon | SEL Premium R-Line |
| 2019 | Volkswagen | Arteon | SEL R-Line |
| 2025 | Volkswagen | ID. Buzz | |
| 2025 | Volkswagen | ID. Buzz | 1st Edition |
| 2025 | Volkswagen | ID. Buzz | Pro S |
| 2025 | Volkswagen | ID. Buzz | Pro S Plus |
| 2021-2025 | Volkswagen | ID.4 | |
| 2021 | Volkswagen | ID.4 | 1st Edition |
| 2023-2024 | Volkswagen | ID.4 | Base |
| 2025 | Volkswagen | ID.4 | Limited |
| 2021-2025 | Volkswagen | ID.4 | Pro |
| 2021-2023 | Volkswagen | ID.4 | Pro / Pro S AWD |
| 2021-2025 | Volkswagen | ID.4 | Pro S |
| 2023-2025 | Volkswagen | ID.4 | Pro S Plus |
| 2023-2025 | Volkswagen | ID.4 | S |
| 2025 | Volkswagen | ID.4 | S Limited |
| 2019-2020 | Volkswagen | Jetta | GLI Autobahn |
| 2019-2020 | Volkswagen | Jetta | R-Line |
| 2019-2020 | Volkswagen | Jetta | S |
| 2019-2020 | Volkswagen | Jetta | SE |
| 2019-2020 | Volkswagen | Jetta | SEL |
| 2019-2020 | Volkswagen | Jetta | SEL Premium |
| 2019-2026 | Volkswagen | Jetta GLI | 2.0 TSI (Mk7) |
| 2019 | Volkswagen | Jetta GLI | 35th Anniversary Edition |
| 2024 | Volkswagen | Jetta GLI | 40TH Anniversary Edition |
| 2019, 2022-2025 | Volkswagen | Jetta GLI | Autobahn |
| 2019 | Volkswagen | Jetta GLI | S |
| 2019-2025 | Volkswagen | Jetta GLI | S / Autobahn / 35th & 40th Anniversary |
| 2019-2026 | Volkswagen | Jetta GLI (MK7) | 2.0 TSI |
| 2019-2026 | Volkswagen | Jetta GLI (MK7) | 2.0 TSI, turbo IS20 or IS38 |
| 2019-2025 | Volkswagen | Jetta GLI (Mk7) | 2.0 TSI |
| 2019-2026 | Volkswagen | Jetta GLI MK7 | 2.0 TSI |
| 2022-2025 | Volkswagen | Taos | |
| 2022-2025 | Volkswagen | Taos | S |
| 2022-2025 | Volkswagen | Taos | S / SE / SEL |
| 2022-2025 | Volkswagen | Taos | SE |
| 2025 | Volkswagen | Taos | SE Black |
| 2022-2025 | Volkswagen | Taos | SEL |
| 2025 | Volkswagen | Taos | Sel |
| 2018-2020 | Volkswagen | Tiguan | S |
| 2018-2020 | Volkswagen | Tiguan | SE |
| 2018-2020 | Volkswagen | Tiguan | SEL |
| 2018-2019 | Volkswagen | Tiguan | SEL Premium |
Which vehicles does this fit?
- It fits the Audi Q3 2026, Audi Q4 e-tron 2022-2026, Audi Q4 e-tron Sportback 2022-2026, Volkswagen Arteon 2019-2020, Volkswagen ID. Buzz 2025, Volkswagen ID.4 2021-2025 and 7 more models. The full year, make, model and submodel list is in the fitment table on this page.
How many are in one order?
- Pair.
What is it made of?
- Proprietary alloy (stronger than 6061-T6 billet aluminum).
Shipping
- Orders placed before 3 PM EST typically ship the same business day. Larger items ship within 1 to 3 business days.
- Standard, expedited, and overnight options at checkout.
- Oversized items ship by freight and take longer.
- Special order items follow a lead time we confirm with you individually before the order is committed.
- Backordered items ship as soon as stock lands. Lead times are manufacturer estimates and can change. Contact us for current ETAs.
- Need to cancel? Email us right away. Cancellations are not guaranteed once an order is in process. In-stock orders cancel free before they ship; a 6% fee applies only to confirmed backorders and special orders.
- International orders: prices do not include VAT, duties, or import fees. Your country charges these at import and they are the buyer’s responsibility.
Returns
- 30 days from delivery to request and ship back a return on new, uninstalled items in original packaging with all hardware.
- Standard returns: 8% restocking fee on the item price before tax and shipping. Shipping is not refunded in either direction. All waived if the item is defective or we made the error.
- Fitment guaranteed: select your vehicle above, or confirm fitment with us in writing before you order. If the part shows as a fit and it is wrong, the return is on us, even after installation. Otherwise, installed or used parts cannot be returned.
- Final sale: special orders, coilovers, electronics, engine internals, turbochargers, superchargers and turbo kits, unless defective or we sent the wrong item.
- Product images may be representative. The SKU and specifications in the listing are what ships.
- Email us for return authorization before shipping anything back.
Full details: Shipping Policy · Returns & Refunds · Warranty






