Details
BrandH&R
SKUHRS30356330
Manufacturer Part Number30356330
Product Information
H&R Trak+ DR wheel spacers push each 5x108 wheel outward 15mm per side for a flush fender fit, staying hubcentric on the 63.3mm bore. Machined from a proprietary alloy with higher tensile strength than 6061-T6 billet aluminum, the full-contact hub spreads load evenly like the factory hub. DR spacers sit between the hub and the wheel, so longer wheel bolts or studs are required and sold separately; sold as a pair.
Note: Product images may be representative samples and may not show the exact thickness, bolt pattern, or finish. Please refer to the specifications below for the exact details of this item.
Specifications
| Type |
Hubcentric wheel spacer (H&R Trak+ DR), bolt-through |
| Series |
TRAK+ Wheel Spacer |
| Thickness |
15mm |
| Bolt Pattern |
5x108 |
| Center Bore |
63.3mm |
| Material |
Proprietary alloy (stronger than 6061-T6 billet aluminum) |
| Hardware |
Longer wheel bolts required, sold separately |
| Spacer Type |
DR |
| Spacer Width |
15mm |
| Fitment Notes |
All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines: a) If possible, name the brand of wheel. b) New bolts must be longer than the original bolts by the width of the wheel spacer used. c) The bolt head must be identical to the existing bolt: Taper 60° End digit 01 Round head for M12/d24 mm, for M14/d28 mm End digit 02 Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03 Flat head for Porsche original wheels M14 x 1.5 End digit 06 d) Safety guidelines (Minimum number of turns for wheel bolts / nuts): M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes). |
| Quantity |
Pair |
| Finish |
Silver |
| Thread |
14x1.5 |
| Part Number |
30356330 |
Documents: Installation Instructions (PDF)
This part fits:
| Year |
Make |
Model |
Submodel |
| 2019-2025 |
Volvo |
S60 |
|
| 2023-2025 |
Volvo |
S60 |
B5 Core |
| 2022 |
Volvo |
S60 |
B5 Inscription |
| 2022 |
Volvo |
S60 |
B5 Momentum |
| 2023-2025 |
Volvo |
S60 |
B5 Plus |
| 2022 |
Volvo |
S60 |
B5 R-Design |
| 2023-2024 |
Volvo |
S60 |
B5 Ultimate |
| 2025 |
Volvo |
S60 |
B5 Ultra |
| 2025 |
Volvo |
S60 |
B5 Ultra Black Edition |
| 2019-2024 |
Volvo |
S60 |
D3 / D4 |
| 2019-2023 |
Volvo |
S60 |
D3/D4/D5 Diesel |
| 2021 |
Volvo |
S60 |
Recharge R-Design |
| 2019-2025 |
Volvo |
S60 |
T4 / T5 / T6 petrol, non-hybrid |
| 2019-2023 |
Volvo |
S60 |
T4/T5/T6 Petrol |
| 2019-2021 |
Volvo |
S60 |
T5 Inscription |
| 2019-2021 |
Volvo |
S60 |
T5 Momentum |
| 2019-2021 |
Volvo |
S60 |
T5 R-Design |
| 2019-2023 |
Volvo |
S60 |
T6 / T8 |
| 2019-2021 |
Volvo |
S60 |
T6 Inscription |
| 2019-2021 |
Volvo |
S60 |
T6 Momentum |
| 2019-2020 |
Volvo |
S60 |
T6 R Design |
| 2019-2021 |
Volvo |
S60 |
T6 R-Design |
| 2019-2025 |
Volvo |
S60 |
T8 |
| 2025 |
Volvo |
S60 |
T8 Core |
| 2019-2020 |
Volvo |
S60 |
T8 Inscription |
| 2025 |
Volvo |
S60 |
T8 Plus |
| 2020 |
Volvo |
S60 |
T8 Polestar |
| 2019-2020 |
Volvo |
S60 |
T8 R-Design |
| 2023-2024 |
Volvo |
S60 |
T8 Recharge Core |
| 2021-2022 |
Volvo |
S60 |
T8 Recharge Inscription |
| 2023-2024 |
Volvo |
S60 |
T8 Recharge Plus |
| 2021-2023 |
Volvo |
S60 |
T8 Recharge Polestar |
| 2021-2022 |
Volvo |
S60 |
T8 Recharge R-Design |
| 2021-2022 |
Volvo |
S60 |
T8 Recharge R-Design Expression |
| 2023-2024 |
Volvo |
S60 |
T8 Recharge Ultimate |
| 2025 |
Volvo |
S60 |
T8 Ultra |
| 2025 |
Volvo |
S60 |
T8 Ultra Black Edition |
| 2019-2024 |
Volvo |
S60 / V60 (SPA) |
D3 / D4 |
| 2019-2025 |
Volvo |
S60 / V60 (SPA) |
T4 / T5 / T6 non-hybrid |
| 2019-2025 |
Volvo |
S60 / V60 (SPA) |
T6 Hybrid / T8 Hybrid |
| 2017 |
Volvo |
S90 |
T5 Inscription |
| 2017-2019 |
Volvo |
S90 |
T5 Momentum |
| 2017-2019 |
Volvo |
S90 |
T6 Inscription |
| 2017-2019 |
Volvo |
S90 |
T6 Momentum |
| 2018-2019 |
Volvo |
S90 |
T8 Inscription |
| 2018-2019 |
Volvo |
S90 |
T8 Momentum |
| 2020 |
Volvo |
V60 |
|
| 2020 |
Volvo |
V60 |
D3 / D4 |
| 2020 |
Volvo |
V60 |
D3/D4/D5 Diesel |
| 2020 |
Volvo |
V60 |
T4 / T5 / T6 petrol, non-hybrid |
| 2020 |
Volvo |
V60 |
T4/T5/T6 Petrol |
| 2020 |
Volvo |
V60 |
T5 Inscription |
| 2020 |
Volvo |
V60 |
T5 Momentum |
| 2020 |
Volvo |
V60 |
T5 R-Design |
| 2020 |
Volvo |
V60 |
T6 / T8 |
| 2020 |
Volvo |
V60 |
T8 |
| 2020 |
Volvo |
V60 |
T8 Polestar |
| 2020 |
Volvo |
V60 Cross Country |
|
| 2020 |
Volvo |
V60 Cross Country |
T5 |
| 2018-2019 |
Volvo |
V90 |
T5 Inscription |
| 2018-2019 |
Volvo |
V90 |
T5 R-Design |
| 2018-2019 |
Volvo |
V90 |
T6 Inscription |
| 2018-2019 |
Volvo |
V90 |
T6 R-Design |
| 2018-2019 |
Volvo |
V90 Cross Country |
T5 |
| 2017-2019 |
Volvo |
V90 Cross Country |
T6 |
| 2018-2019 |
Volvo |
V90 Cross Country |
T6 Ocean Race |
| 2019 |
Volvo |
XC40 |
T5 Inscription |
| 2019 |
Volvo |
XC40 |
T5 Momentum |
| 2019 |
Volvo |
XC40 |
T5 R-Design |
| 2018-2019 |
Volvo |
XC60 |
T5 Inscription |
| 2018-2019 |
Volvo |
XC60 |
T5 Momentum |
| 2018-2019 |
Volvo |
XC60 |
T5 R-Design |
| 2018-2019 |
Volvo |
XC60 |
T6 Inscription |
| 2018-2019 |
Volvo |
XC60 |
T6 Momentum |
| 2018-2019 |
Volvo |
XC60 |
T6 R-Design |
| 2018-2019 |
Volvo |
XC60 |
T8 Inscription |
| 2018-2019 |
Volvo |
XC60 |
T8 Momentum |
| 2018-2019 |
Volvo |
XC60 |
T8 R-Design |