H&R Trak+ DR wheel spacers add 10mm per side for 20mm of extra track across the axle, and are machined from a proprietary aluminum and magnesium alloy that H&R rates above 6061-T6 billet for tensile strength. The DR design sits between the hub face and the wheel and carries a full contact hubcentric register on a 71.6mm center bore with a 5x130 bolt pattern, so wheel load is taken by the hub rather than by the fasteners. Fitment uses longer 14x1.5 wheel bolts, which are ordered separately. The spacers are hard anodized in silver and produced in Germany.
Note: Product images may be representative samples and may not show the exact thickness, bolt pattern, or finish. Please refer to the specifications below for the exact details of this item.
Specifications
| Type | Hubcentric wheel spacer (Trak+ DR Series) |
| Series | TRAK+ Wheel Spacer |
| Width | 10mm per spacer (20mm per axle) |
| Bolt Pattern | 5x130 |
| Center Bore | 71.6mm |
| Bolt Thread | 14x1.5 |
| Material | Proprietary aluminum and magnesium alloy |
| Finish | Hard anodized silver |
| Hardware | Longer wheel bolts required, sold separately |
| Manufactured In | Germany |
| Spacer Type | DR |
| Spacer Width | 10mm |
| Fitment Notes | All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines: a) If possible, name the brand of wheel. b) New bolts must be longer than the original bolts by the width of the wheel spacer used. c) The bolt head must be identical to the existing bolt: Taper 60° End digit 01 Round head for M12/d24 mm, for M14/d28 mm End digit 02 Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03 Flat head for Porsche original wheels M14 x 1.5 End digit 06 d) Safety guidelines (Minimum number of turns for wheel bolts / nuts): M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes). |
| Quantity | Pair (2 spacers) |
| Part Number | 20957160Z |
Documents: Installation Instructions (PDF)
This part fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2022 | Porsche | 718 Boxster | 25 Years |
| 2017-2025 | Porsche | 718 Boxster | Base |
| 2018-2019 | Porsche | 718 Boxster | GTS |
| 2021-2025 | Porsche | 718 Boxster | GTS 4.0 |
| 2017-2025 | Porsche | 718 Boxster | S |
| 2024-2025 | Porsche | 718 Boxster | Style Edition |
| 2020-2023 | Porsche | 718 Boxster | T |
| 2017-2025 | Porsche | 718 Cayman | Base |
| 2020-2023 | Porsche | 718 Cayman | GT4 |
| 2022-2025 | Porsche | 718 Cayman | GT4 RS |
| 2018-2019 | Porsche | 718 Cayman | GTS |
| 2021-2025 | Porsche | 718 Cayman | GTS 4.0 |
| 2017-2025 | Porsche | 718 Cayman | S |
| 2024-2025 | Porsche | 718 Cayman | Style Edition |
| 2020-2023 | Porsche | 718 Cayman | T |
| 2020-2023 | Porsche | 718 Spyder | Base |
| 2024-2025 | Porsche | 718 Spyder | RS |
| 2021-2024 | Porsche | 911 | 992 |
| 2022-2023 | Porsche | 911 | 992 Carrera 4 GTS / Targa 4 |
| 2021-2026 | Porsche | 911 | Carrera |
| 2021-2024 | Porsche | 911 | Carrera (992.1) |
| 2021-2024 | Porsche | 911 | Carrera / 4 / S / 4S (992.1) |
| 2025 | Porsche | 911 | Carrera / T / S / 4S (992.2) |
| 2021-2024 | Porsche | 911 | Carrera 4 |
| 2021-2024 | Porsche | 911 | Carrera 4 (992.1) |
| 2022-2026 | Porsche | 911 | Carrera 4 GTS |
| 2021-2024 | Porsche | 911 | Carrera 4 GTS (992.1) |
| 2021-2024 | Porsche | 911 | Carrera 4S |
| 2021-2024 | Porsche | 911 | Carrera 4S (992.1) |
| 2022-2026 | Porsche | 911 | Carrera GTS |
| 2021-2024 | Porsche | 911 | Carrera GTS (992.1) |
| 2021-2024 | Porsche | 911 | Carrera GTS / 4 GTS (992.1) |
| 2021-2026 | Porsche | 911 | Carrera S |
| 2021-2024 | Porsche | 911 | Carrera S (992.1) |
| 2023-2026 | Porsche | 911 | Carrera T |
| 2023-2024 | Porsche | 911 | Dakar |
| 2023 | Porsche | 911 | Edition 50 Years Porsche Design |
| 2022-2026 | Porsche | 911 | GT3 |
| 2023-2026 | Porsche | 911 | GT3 Touring Package |
| 2024-2025 | Porsche | 911 | S/T |
| 2026 | Porsche | 911 | Spirit 70 |
| 2023 | Porsche | 911 | Sport Classic |
| 2021-2024 | Porsche | 911 | Targa 4 |
| 2022-2026 | Porsche | 911 | Targa 4 GTS |
| 2021-2024 | Porsche | 911 | Targa 4S |
| 2021 | Porsche | 911 | Targa 4S Heritage Design Edition |
| 2021-2025 | Porsche | 911 | Turbo |
| 2021-2024 | Porsche | 911 | Turbo (992.1) |
| 2021-2024 | Porsche | 911 | Turbo / Turbo S (992) |
| 2021-2024 | Porsche | 911 | Turbo / Turbo S (992.1) |
| 2025 | Porsche | 911 | Turbo 50 Years |
| 2021-2025 | Porsche | 911 | Turbo S |
| 2021-2024 | Porsche | 911 | Turbo S (992.1) |
| 2021-2026 | Porsche | 911 (992) | Carrera |
| 2021-2026 | Porsche | 911 (992) | Carrera 4 |
| 2021-2026 | Porsche | 911 (992) | Carrera 4 GTS |
| 2021-2026 | Porsche | 911 (992) | Carrera 4S |
| 2021-2026 | Porsche | 911 (992) | Carrera GTS |
| 2021-2026 | Porsche | 911 (992) | Carrera S |
| 2021-2024 | Porsche | 911 (992.1) | Carrera |
| 2021-2024 | Porsche | 911 (992.1) | Carrera / Carrera 4 / Carrera S / Carrera 4S / Carrera GTS / Carrera 4 GTS |
| 2021-2024 | Porsche | 911 (992.1) | Carrera 4 |
| 2021-2024 | Porsche | 911 (992.1) | Carrera 4 GTS |
| 2021-2024 | Porsche | 911 (992.1) | Carrera 4S |
| 2021-2024 | Porsche | 911 (992.1) | Carrera GTS |
| 2021-2024 | Porsche | 911 (992.1) | Carrera S |
| 2021-2024 | Porsche | 911 (992.1) | Dakar |
| 2021-2024 | Porsche | 911 (992.1) | Turbo |
| 2021-2024 | Porsche | 911 (992.1) | Turbo / Turbo S |
| 2021-2024 | Porsche | 911 (992.1) | Turbo / Turbo S / Carrera / Carrera 4 / Carrera S / Carrera 4S / Carrera GTS / Carrera 4 GTS |
| 2021-2024 | Porsche | 911 (992.1) | Turbo S |
| 2021-2026 | Porsche | 911 (992.2) | Carrera |
| 2025-2026 | Porsche | 911 (992.2) | Carrera / Carrera T / Carrera S / Carrera 4S |
| 2021-2026 | Porsche | 911 (992.2) | Carrera 4S |
| 2021-2026 | Porsche | 911 (992.2) | Carrera S |
| 2021-2026 | Porsche | 911 (992.2) | Carrera T |
| 2021-2024 | Porsche | 911 Turbo | 992 (3.8TT) |
| 2021-2024 | Porsche | 911 Turbo S | 992 (3.8TT) |
| 2019-2025 | Porsche | Cayenne | Base |
| 2020-2025 | Porsche | Cayenne | Coupe |
| 2023 | Porsche | Cayenne | Coupe Platinum Edition |
| 2019-2025 | Porsche | Cayenne | E-Hybrid |
| 2020-2025 | Porsche | Cayenne | E-Hybrid Coupe |
| 2023 | Porsche | Cayenne | E-Hybrid Coupe Platinum Edition |
| 2023 | Porsche | Cayenne | E-Hybrid Platinum Edition |
| 2021-2023, 2025 | Porsche | Cayenne | GTS |
| 2021-2023, 2025 | Porsche | Cayenne | GTS Coupe |
| 2022-2023 | Porsche | Cayenne | Platinum Edition |
| 2019-2025 | Porsche | Cayenne | S |
| 2020-2025 | Porsche | Cayenne | S Coupe |
| 2023 | Porsche | Cayenne | S Coupe Platinum Edition |
| 2024-2025 | Porsche | Cayenne | S E-Hybrid |
| 2024-2025 | Porsche | Cayenne | S E-Hybrid Coupe |
| 2022-2023 | Porsche | Cayenne | S Platinum Edition |
| 2019-2023 | Porsche | Cayenne | Turbo |
| 2020-2023 | Porsche | Cayenne | Turbo Coupe |
| 2024-2025 | Porsche | Cayenne | Turbo E-Hybrid |
| 2024-2025 | Porsche | Cayenne | Turbo E-Hybrid Coupe |
| 2022-2025 | Porsche | Cayenne | Turbo GT Coupe |
| 2020-2023 | Porsche | Cayenne | Turbo S E-Hybrid |
| 2020-2023 | Porsche | Cayenne | Turbo S E-Hybrid Coupe |
Which vehicles does this fit?
- It fits the Porsche 718 Boxster 2017-2025, Porsche 718 Cayman 2017-2025, Porsche 718 Spyder 2020-2025, Porsche 911 2021-2026, Porsche 911 (992) 2021-2026, Porsche 911 (992.1) 2021-2024 and 4 more models. The full year, make, model and submodel list is in the fitment table on this page.
How many are in one order?
- Pair (2 spacers).
What is it made of?
- Proprietary aluminum and magnesium alloy.
Shipping
- Orders placed before 3 PM EST typically ship the same business day. Larger items ship within 1 to 3 business days.
- Standard, expedited, and overnight options at checkout.
- Oversized items ship by freight and take longer.
- Special order items follow a lead time we confirm with you individually before the order is committed.
- Backordered items ship as soon as stock lands. Lead times are manufacturer estimates and can change. Contact us for current ETAs.
- Need to cancel? Email us right away. Cancellations are not guaranteed once an order is in process. In-stock orders cancel free before they ship; a 6% fee applies only to confirmed backorders and special orders.
- International orders: prices do not include VAT, duties, or import fees. Your country charges these at import and they are the buyer’s responsibility.
Returns
- 30 days from delivery to request and ship back a return on new, uninstalled items in original packaging with all hardware.
- Standard returns: 8% restocking fee on the item price before tax and shipping. Shipping is not refunded in either direction. All waived if the item is defective or we made the error.
- Fitment guaranteed: select your vehicle above, or confirm fitment with us in writing before you order. If the part shows as a fit and it is wrong, the return is on us, even after installation. Otherwise, installed or used parts cannot be returned.
- Final sale: special orders, coilovers, electronics, engine internals, turbochargers, superchargers and turbo kits, unless defective or we sent the wrong item.
- Product images may be representative. The SKU and specifications in the listing are what ships.
- Email us for return authorization before shipping anything back.
Full details: Shipping Policy · Returns & Refunds · Warranty






