Details
Product Information
H&R Trak+ DR wheel spacers push each 5x120 wheel outward 3mm per side to clear calipers or fine-tune fitment, staying hubcentric on the 72.5mm bore. Machined from a proprietary alloy with higher tensile strength than 6061-T6 billet aluminum, the full-contact hub spreads load evenly like the factory hub. DR spacers sit between the hub and the wheel, so longer wheel bolts or studs are required and sold separately; sold as a pair.
Note: Product images may be representative samples and may not show the exact thickness, bolt pattern, or finish. Please refer to the specifications below for the exact details of this item.
Specifications
| Type | Hubcentric wheel spacer (H&R Trak+ DR), bolt-through |
| Series | TRAK+ Wheel Spacer |
| Thickness | 3mm |
| Bolt Pattern | 5x120 |
| Center Bore | 72.5mm |
| Material | Proprietary alloy (stronger than 6061-T6 billet aluminum) |
| Finish | Natural / silver |
| Thread | 12x1.5 / 14x1.25 |
| Hardware | Longer wheel bolts required, sold separately |
| Spacer Type | DR |
| Spacer Width | 3mm |
| Quantity | Pair |
| Fitment Notes | Rear only; All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines: a) If possible, name the brand of wheel. b) New bolts must be longer than the original bolts by the width of the wheel spacer used. c) The bolt head must be identical to the existing bolt: Taper 60° End digit 01 Round head for M12/d24 mm, for M14/d28 mm End digit 02 Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03 Flat head for Porsche original wheels M14 x 1.5 End digit 06 d) Safety guidelines (Minimum number of turns for wheel bolts / nuts): M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).; These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure the vehicle hub to verify sufficient height will remain to center the wheel after spacer installation. |
| Part Number | 0675725 |
Documents: Installation Instructions (PDF)
This part fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2013 | BMW | 128i | Base |
| 2008-2013 | BMW | 135i | Base |
| 2013 | BMW | 135is | Base |
| 1992-1999 | BMW | 318i | Base |
| 1992-1998 | BMW | 318is | Base |
| 1995-1998 | BMW | 318ti | Base |
| 1999-2005 | BMW | 323Ci | Base |
| 1999-2005 | BMW | 323i | Base |
| 1999-2013 | BMW | 325Ci | Base |
| 1992-2012 | BMW | 325i | Base |
| 1992-1998 | BMW | 325is | Base |
| 2001-2006 | BMW | 325xi | Base |
| 1999-2013 | BMW | 328Ci | Base |
| 1992-2013 | BMW | 328i | Base |
| 1992-1998 | BMW | 328is | Base |
| 2007-2013 | BMW | 328xi | Base |
| 1999-2013 | BMW | 330Ci | Base |
| 1999-2006 | BMW | 330i | Base |
| 2001-2006 | BMW | 330xi | Base |
| 2006-2013 | BMW | 335Ci Convertible | E93 Cabrio |
| 2008-2011 | BMW | 335d | Base |
| 2007-2013 | BMW | 335i | Base |
| 2007-2013 | BMW | 335is | Base |
| 2007-2013 | BMW | 335xi | Base |
| 1990-1995, 2004-2007 | BMW | 525i | Base |
| 2004-2010 | BMW | 525xi | Base |
| 1982-1988 | BMW | 528e | Base |
| 2008-2016 | BMW | 528i | Base |
| 1993-1995, 2004-2007 | BMW | 530i | Base |
| 2004-2010 | BMW | 530xi | Base |
| 2014-2016 | BMW | 535d | Base |
| 1985-1993, 2008-2014 | BMW | 535i | Base |
| 2010-2014 | BMW | 535i GT | Base |
| 2011-2014 | BMW | 535i GT xDrive | Base |
| 1982-1988 | BMW | 535is | Base |
| 2004-2010 | BMW | 535xi | Base |
| 1993-1995 | BMW | 540i | Base |
| 2004-2006 | BMW | 545i | Base |
| 2006-2014 | BMW | 550i | Base |
| 2010-2014 | BMW | 550i GT | Base |
| 2010-2014 | BMW | 550i GT xDrive | Base |
| 1983-1990 | BMW | 633i | E24 |
| 1983-1990 | BMW | 635i | E24 |
| 2012-2018 | BMW | 640i | Base |
| 2014-2018 | BMW | 640i xDrive | Base |
| 2004-2011 | BMW | 645Ci | Base |
| 2006-2010, 2012-2018 | BMW | 650i | Base |
| 2012-2018 | BMW | 650i xDrive | Base |
| 1995-2001 | BMW | 730i | E38 |
| 1995-2001 | BMW | 730iL | E38 |
| 1983-1987 | BMW | 733i | Base |
| 1988-1994 | BMW | 735i | Base |
| 1989-1994 | BMW | 735iL | Base |
| 2009-2015 | BMW | 740Li | Base |
| 1988-2001, 2009-2015 | BMW | 740i | Base |
| 1989-2001 | BMW | 740iL | Base |
| 2011-2012 | BMW | 750Li | ActiveHybrid |
| 2009-2015 | BMW | 750Li | Base |
| 2010-2015 | BMW | 750Li xDrive | Base |
| 2011-2012 | BMW | 750i | ActiveHybrid |
| 2009-2015 | BMW | 750i | Base |
| 2010-2015 | BMW | 750i xDrive | Base |
| 1988-1994, 1997-2001 | BMW | 750iL | Base |
| 2009-2015 | BMW | 760Li | Base |
| 1990-1997 | BMW | 840Ci | Base |
| 1990-1997 | BMW | 840i | E31 |
| 1990-1997 | BMW | 840i | G14/G15/G16 |
| 1990-1997 | BMW | 850Ci | Base |
| 1990-1997 | BMW | 850i | Base |
| 1998-2002 | BMW | M-Coupe | MRC |
| 1998-2002 | BMW | M-Roadster | MRC |
| 1988-1991, 1995-1999, 2001-2006, 2008-2013 | BMW | M3 | Base |
| 1995 | BMW | M3 | Lightweight |
| 1990-1995, 2005-2010 | BMW | M5 | Base |
| 2005-2011 | BMW | M6 | Base |
| 2013-2015 | BMW | X1 | sDrive28i |
| 2013-2015 | BMW | X1 | xDrive28i |
| 2015-2017 | BMW | X3 | sDrive28i |
| 2015-2017 | BMW | X3 | xDrive28d |
| 2011-2017 | BMW | X3 | xDrive28i |
| 2011-2017 | BMW | X3 | xDrive35i |
| 2017-2018 | BMW | X4 | M40i |
| 2015-2018 | BMW | X4 | xDrive28i |
| 2010-2013 | BMW | X5 | M |
| 2010-2014 | BMW | X6 | M |
| 2008-2014 | BMW | X6 | xDrive35i |
| 2008-2014 | BMW | X6 | xDrive50i |
| 1999-2002 | BMW | Z3 | Coupe |
| 1999-2002 | BMW | Z3 | M Coupe |
| 1998-2002 | BMW | Z3 | M Roadster |
| 1996-2002 | BMW | Z3 | Roadster |
| 2003-2005 | BMW | Z4 | 2.5i |
| 2003-2005 | BMW | Z4 | 3.0i |
| 2006-2008 | BMW | Z4 | Coupe 3.0si |
| 2006-2008 | BMW | Z4 | M Coupe |
| 2006-2008 | BMW | Z4 | M Roadster |
| 2006-2008 | BMW | Z4 | Roadster 3.0i |
| 2006-2008 | BMW | Z4 | Roadster 3.0si |
| 2009-2011 | BMW | Z4 | sDrive30i |
| 2009-2015 | BMW | Z4 | sDrive35i |
| 2011-2015 | BMW | Z4 | sDrive35is |
| 2003 | BMW | Z8 | Alpina |
| 2000-2003 | BMW | Z8 | Base |
| 2011-2016 | Mini | Cooper Countryman | Base |
| 2013-2016 | Mini | Cooper Countryman | John Cooper Works ALL4 |
| 2011-2016 | Mini | Cooper Countryman | S |
| 2011-2016 | Mini | Cooper Countryman | S ALL4 |
| 2013-2014 | Mini | Cooper Paceman | Base |
Which vehicles does this fit?
- It fits the BMW 128i 2008-2013, BMW 135i 2008-2013, BMW 135is 2013, BMW 318i 1992-1999, BMW 318is 1992-1998, BMW 318ti 1995-1998 and 75 more models. The full year, make, model and submodel list is in the fitment table on this page.
How many are in one order?
- Pair.
What is it made of?
- Proprietary alloy (stronger than 6061-T6 billet aluminum).
Shipping
- In stock orders typically ship within 1 to 3 business days.
- Standard, expedited, and overnight options at checkout.
- Oversized items ship by freight and take longer.
- Special order items follow a lead time we confirm with you individually before the order is committed.
- Backordered items ship as soon as stock lands. Lead times are manufacturer estimates and can change. Contact us for current ETAs.
- Need to cancel? Email us right away. Cancellations are not guaranteed once an order is in process. In-stock orders cancel free before they ship; a 6% fee applies only to confirmed backorders and special orders.
- International orders: prices do not include VAT, duties, or import fees. Your country charges these at import and they are the buyer’s responsibility.
Returns
- 30 days from delivery to request and ship back a return on new, uninstalled items in original packaging with all hardware.
- Standard returns: 8% restocking fee on the item price before tax and shipping. Shipping is not refunded in either direction. All waived if the item is defective or we made the error.
- Fitment guaranteed: select your vehicle above, or confirm fitment with us in writing before you order. If the part shows as a fit and it is wrong, the return is on us, even after installation. Otherwise, installed or used parts cannot be returned.
- Final sale: special orders, coilovers, electronics, engine internals, turbochargers, superchargers and turbo kits, unless defective or we sent the wrong item.
- Product images may be representative. The SKU and specifications in the listing are what ships.
- Email us for return authorization before shipping anything back.
Full details: Shipping Policy · Returns & Refunds · Warranty






