A flow matched pair of ID1300-XDS injectors for turbocharged Polaris RZR models running the OEM fuel rail, with 14mm grey top adapters and an OEM rail spacer kit so the factory injector clip is reused. Full length USCAR to EV1 plug and play connectors are included for the factory harness. The ID1300-XDS was developed with Bosch Motorsport and uses all stainless internals, so it is built for ethanol and other alternative fuels while keeping a minimum fuel mass low enough for clean idle and cruise on gasoline. Nominal flow is 1340 cc/min at 3.0 bar (43.5 psi), and Injector Dynamics dynamic flow data runs to about 2037 cc/min at 100 psid. Injector Dynamics publishes offset (dead time) and flow data for each pressure and voltage, and ECU calibration is required.
Specifications
| Type |
High-impedance top-feed fuel injector (ID1300-XDS) |
| Flow Rate |
1340 cc/min nominal at 3.0 bar (43.5 psi), iso-octane at 52°C (125°F) |
| Top |
14mm grey top adapter with OEM rail spacer kit |
| Connector |
USCAR, with USCAR to EV1 plug and play adapters included |
| Fuel Compatibility |
All known fuels, including gasoline, race fuel and ethanol |
| Quantity |
2 (set of 2) |
| Part Number |
1300.16.01.48.14.2 |
This part fits:
| Year |
Make |
Model |
Submodel |
| 2016+ |
Polaris |
RZR Turbo |
All turbo submodels (OEM fuel rail) |